Chapter 2
Overview: Cisco 12000 Series Router Shared Port Adapters
The WRAP, PASSTHRU, and MATESYNC LEDs apply to the SPA in RPR/SRP mode only.
Note
The 1-Port OC-48c/STM-16 POS SPA LEDs are described in
Table 2-26 1-Port OC-48c/STM-16 POS SPA LEDs
LED Label
WRAP
PASSTHRU
MATESYNC
C/A
A/L
CARRIER
ACTIVE
STATUS
1-Port OC-48c/STM-16 POS SPA Interface Specifications
The framer processes incoming and outgoing SONET or SDH frames. The framer operates at
OC-48c/STM-64 line rates (9.95 Gbps).
Packet data is transported with a user-configured encapsulation (such as Point-to-Point Protocol [PPP])
and is mapped into the STS-48/STM-64 frame.
The 1-Port OC-48c/STM-16 POS SPA interface is compliant with the following RFCs:
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
Color
State
Meaning
Off
Off
Port is not in wrap mode.
Green
On
Port is in wrap mode somewhere on the ring.
Amber
On
Port is in wrap mode locally.
Off
Off
Port is not in pass-thru mode.
Amber
On
Port is in pass-thru mode.
Off
Off
Mate port is not synchronized.
Green
On
Mate port is synchronized.
Off
Off
Port is not enabled by software.
Green
On
Port is enabled by software.
Amber
On
Port is enabled by software, and there is at least one alarm.
Off
Off
Port is not enabled by software.
Green
On
Port is enabled by software, loopback is off.
Amber
On
Port is enabled by software, loopback is on.
Off
Off
Port is not enabled by software.
Green
On
Port is enabled by software; there is a valid SONET signal
without alarms.
Amber
On
Port is enabled by software; there is at least one alarm (LOS,
LOF, RDI, and so on).
Blinking
Indicates SRP mode mismatch alarm.
Off
Off
Port is not enabled by software.
Green
On
Port is enabled by software; loopback is off.
Amber
On
Port is enabled by software; loopback is on.
Off
Off
SPA power off.
Green
On
SPA is ready and operational.
Amber
On
SPA power is on and good; SPA is being configured.
Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
1-Port OC-48c/STM-16 POS SPA Overview
Table
2-26.
2-31