8-Port Fastethernet Spa Cables, Connectors, And Pinouts; Figure 2-6 Rj-45 Connections, Plug, And Receptacle; Table 2-9 8-Port Fastethernet Spa Leds; Table 2-10 Rj-45 Connector Pinout - Cisco 12000 - Series Chassis Modular Expansion Base Hardware Installation Manual

Chapter 2 Overview: Cisco 12000 Series Router Shared Port Adapters
Table 2-9
LED Label
STATUS
1. In this case, port number refers to the numbered LEDs on the 8-Port FastEthernet SPA (0, 1, 2, 3, 4, 5, 6 or 7). Each LED

8-Port FastEthernet SPA Cables, Connectors, and Pinouts

The interface connectors on the 8-Port FastEthernet SPA are eight individual RJ-45 receptacles. You can
use all eight interface connectors simultaneously. Each connection supports IEEE 802.3 and Ethernet
10/100BASE-T interfaces compliant with appropriate standards. Cisco Systems does not supply
Category 5 unshielded twisted-pair (UTP) RJ-45 cables; these cables are available commercially.
Figure 2-6
Figure 2-6
RJ-45 connector
Table 2-10

Table 2-10 RJ-45 Connector Pinout

Pin
1
2
3
4
5
6
7
8
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
8-Port FastEthernet SPA LEDs (continued)
Color
Off
Green
Amber
number on the 8-Port FastEthernet SPA references a port on the SPA.
shows the RJ-45 connector.
RJ-45 Connections, Plug, and Receptacle
8 7 6 5 4 3 2 1
lists the pinouts and signals for the RJ-45 connector.
Description
Transmit data + (TxD+)
TxD–
Receive data + (RxD+)
Reserved
Reserved
RxD–
Reserved
Reserved
State Meaning
Off SPA power is off.
On SPA is ready and operational.
On SPA power is on and good, and the SPA is being
configured.
Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
8-Port Fast Ethernet SPA Overview
2-11