Spa Cable-Management Brackets - Cisco 12000 - Series Chassis Modular Expansion Base Hardware Installation Manual

SPA Cable-Management Brackets

SPA Cable-Management Brackets
SPAs are shipped with an accessory kit that includes cable-management brackets.
cable-management brackets installed in a SPA, as well as cable routing.
Figure 5-3
To install cable-management brackets on a SPA, perform the following steps:
Step 1 Screw the two pull assemblies into both sides of the SPA.
Step 2 Insert the cable-management clip into the slot.
Step 3 To remove the cable-management clip, depress the button on the clip and pull it out.
Blank filler plugs are provided if no cable-management clips are installed.
Note
Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
5-10
SPA Cable-Management Brackets
WS-X6 K-SUP 2-2GE
CONSO LE
PORT
MODE
CONSO LE
SUPER VISOR 2
PCMCIA
OSM-4O C12 POS-SI
4 PORT OC-12 POS SM
IR
7600-MS C-600
MODULAR
SERVICES CARD
Chapter 5 Installing and Removing a Shared Port Adapter
Switch
Load
100%
PORT 1
EJECT
1%
SPA-4XO C3-ATM
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
Figure 5-3 shows
PORT 2