Figure 1-8 Slot, Subslot, And Port Locations For The 1-Port 10-Gigabit Ethernet Spa And The 10-Port Gigabit Ethernet; Table 1-8 Subslot Locations For The 1-Port 10-Gigabit Ethernet Spa - Cisco 12000 - Series Chassis Modular Expansion Base Hardware Installation Manual

Cisco 12000 SIP-600 Overview
Table 1-8
Call Out Number
1
2
SPA Interface Addresses on the Cisco 12000 SIP-600
A Cisco 12000 Series Router identifies a SPA interface address by its SIP slot number, SPA subslot, and
port number on the SPA, in the format slot/subslot/port. Subslots and ports are numbered starting from
0, so each Cisco 12000 SIP-600 has two subslots 0 (left) and 1 (right). For example, the interface address
of a 1-port SPA located in the second SIP subslot, where the SIP is inserted into router line card slot 3
is 3/1/0.
and the 10-Port Gigabit Ethernet SPA.
Figure 1-8
1
Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
1-10
Subslot Locations for the 1-Port 10-Gigabit Ethernet SPA
Description
Subslot 0
Subslot 1
Figure 1-8 shows the slot, subslot, and port locations for the 1-Port 10-Gigabit Ethernet SPA
Slot, Subslot, and Port Locations for the 1-Port 10-Gigabit Ethernet SPA and the 10-Port
Gigabit Ethernet SPA.
A
ALAR M A
B
ALAR M B
Chapter 1 Overview: Cisco 12000 Series Router SPA Interface Processors
MBUS CSC
SFC
FAIL
ENABLE
A B 0 1 0
1 2 3 4
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
2
3