Router Hardware Installation; Supported Platforms; Power Management - Cisco 12000 - Series Chassis Modular Expansion Base Hardware Installation Manual

Router Hardware Installation

Table 1-1 SIP and SPA Compatibility on the Cisco 12000 Series Router (continued)
SPA
1-Port 10-Gigabit Ethernet SPA
5-Port Gigabit Ethernet SPA
10-Port Gigabit Ethernet SPA
1-Port Channelized STM-1/OC-3 SPA
1-Port OC-48c/STM-16 POS SPA
2-Port OC48-POS/RPR SPA
1-Port OC-192c/STM-64 POS/RPR SPA
2-Port, 4-Port, and 8-Port OC-3c/STM-1
and OC-12c/STM-4 POS SPA
Router Hardware Installation
For Cisco 12000 series router hardware installation and configuration information, refer to the
installation and configuration guide for your router. The guide includes information on the router switch
fabric and how it affects the operation of SIPs, as well as SIP slot locations, slot width, and other
requirements.
Note References to line cards in the router hardware installation and configuration guides apply equally to
SIPs.

Supported Platforms

SIPs are supported on all Cisco 12000 series routers. The 2.5G ISE SIP is supported on the Cisco 12016,
124xx, and 128xx routers. The Cisco 12000 SIP-401, the Cisco 12000 SIP-501, the Cisco 12000
SIP-600, and the Cisco 12000 SIP-601are supported on the Cisco 124xx and 128xx routers.
To support the requirements of this line card, the Cisco 12000 series router must have at least one clock
Note
and scheduler card (CSC) installed. For additional information, refer to the installation and configuration
guide for your Cisco 12000 series router.

Power Management

Different types of power supplies are used in Cisco 12000 series routers. The chassis power supply
configuration may cause limitations on the number of SPAs that can be installed in the chassis. If the
number of SPAs installed in the chassis draw more power than the power supply configuration supports,
the console displays a warning indicating that the configured power supply budget has been exceeded.
Power management is described in the Cisco 12000 series router chassis installation guides. Please refer
to the chassis installation guide for your router for information about power management.
Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
1-2
Chapter 1
2.5G ISE SIP 2.5G SIP
X
X
Overview: Cisco 12000 Series Router SPA Interface Processors
SIP Type
5G SIP
X
X
X
X
X
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
10G SIP
X
X
X
X
X
X
X
X