Cisco CISCO2650 - 2650 Router Hardware Installation Manual page 377

Chapter 35 Connecting Application Performance Assurance Enhanced Network Modules
Password:
NME-APA#
Step 2 Save the running configuration of the network module by using the following command:
NME-APA# copy running-config startup-config
Writing general configuration file to temporary location...
Backing-up general configuration file...
Copy temporary file to final location...
NME-APA#>copy startup-config backup.config
Confirm that your backup.config file is created by entering the following command and reviewing the
Step 3
file list:
NME-APA# dir
File list for /root/tffs0/
1663
Back up the configuration file to a host:
Step 4
NME-APA# copy backup.config ftp://[[[username[:password]@]location]/directory/source-file
Exit the network module session by entering the following command:
Step 5
NME-APA# logout
Are you sure? y
*** CLI session terminated due to timeout ***
Connection to 172.29.52.242 closed by foreign host.
Telnet to the NME-APA's router as follows:
Step 6
Router# telnet 10.10.10.1
Trying 10.10.10.1, 2065 ... Open
Press RETURN to get started!
router> enable
router#
Perform a graceful shutdown of the network module by pressing the Reset button on the NME-APA and
Step 7
waiting for the SYS LED to turn green. Or you can use the following command:
Router# service-module integrated-service-engine slot / unit shutdown
Do you want to proceed with shutdown?[confirm]Y
Use service module reset command to recover from shutdown.
WARNING: Confirm that the service-module status shows 'is Shutdown' before remo!
200 Thu Apr 5 10:25:42 200
72 Thu Mar 22 03:45:31 200
80 Thu Mar 22 03:45:31 200
136 Thu Mar 22 03:45:31 200
48 Thu Mar 22 03:46:14 200
Thu Apr 5 10:25:42 200
512 Thu Apr 5 10:24:56 200
Online Insertion and Removal of NME-APA-E3
.
..
app
engage
images
backup.config
system
Cisco Network Modules Hardware Installation Guide
DIR
DIR
DIR
DIR
DIR
DIR
35-5