Cisco CISCO2650 - 2650 Router Hardware Installation Manual page 269

Connecting Cisco Unity Express Network
Modules
This chapter describes Cisco Unity Express network modules for modular access routers and contains
the following sections:
•
•
•
•
To determine whether your router supports a specific network module, see
Tip
Cisco Unity Express Network Module Overview
This section provides information on the Cisco Unity Express network module (NM-CUE). (See
Figure
Caution To comply with the Telcordia GR-1089 NEBS standard for electromagnetic compatibility and safety,
connect the Cisco Unity Express network module (NM-CUE) only to intrabuilding or nonexposed wiring
or cabling. The intrabuilding cable must be shielded and the shield must be grounded at both ends.
The Fast Ethernet port and CompactFlash slot, though available on the hardware, are not supported by
Note
the Cisco Unity Express network module. The compact Flash slot has a metal cover.
OL-2485-20
Cisco Unity Express Network Module Overview, page 23-1
Cisco Unity Express Network Module LEDs, page 23-2
Online Insertion and Removal with a Cisco Unity Express Network Module, page 23-3
Related Documents, page 23-5
23-1.)
C H A P T E R
Cisco Network Modules Hardware Installation Guide
23
Table 1-6 on page 1-16.
23-1