Pizza Function - Breville BOV800XL Instruction Booklet

OPERATING YOUR BREVILLE SMART OVEN™ — PIZZA
7. The timer will be displayed and
begin to count down in one minute
increments. The temperature and time
can be adjusted during the broiling
cycle by turning the corresponding
TEMPERATURE and TIME dial.
NOTE:
Depending on the food being
broiled, it may be necessary to
turn food over half way through
the cooking time to achieve even
cooking and browning.
8. At the end of the broiling cycle, the
oven alert will sound three times and
the START/CANCEL button surround
will cease to illuminate.
THE OUTER SURFACE OF THE
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OPERATION. ALWAYS
USE PROTECTIVE HOT PADS OR
INSULATED OVEN MITTS WHEN
INSERTING, REMOVING OR
HANDLING ITEMS FROM
THE OVEN.
9. The broiling cycle can be stopped at any
time by pressing the START/CANCEL
button. This will cancel the cycle and the
button surround illumination will go out.
BOV800XL_IB_ENG_FA.indd 31 BOV800XL_IB_ENG_FA.indd 31

PIZZA FUNCTION

Elements
Top and bottom heating elements cycle on
and off to regulate the correct temperature.
Rack Position
Middle rack height position.
Optional Settings
CONVECTION button
TEMPERATURE CONVERSION button
FROZEN FOODS button
The PIZZA function melts and browns
cheese and toppings, while crisping the
pizza crust.
1. Insert the wire rack into the middle rack
height position. The wire rack should
be positioned with the spokes facing
upwards.
2. Close the oven door.
3. Turn the FUNCTION dial until the
indicator on the LCD screen reaches the
PIZZA function. The top fi gure on the
LCD screen indicates the preset PIZZA
temperature of '450°F', while the bottom
fi gure on the LCD screen indicates the
preset '12 SIZE'. The preset
CONVECTION setting and preset
FROZEN FOODS setting will also
be displayed (see Page 16 if cooking
fresh pizza).
31
5/5/09 9:44:02 AM 5/5/09 9:44:02 AM