Table of Contents
Advertisement
Charger Specifications
Size: 8.6 x 8.2 x 7.8 cm (3.4 x 3.2 x 3.1 in.)
Weight: 97 g (3.4 oz.) per model
Charger system ingress protection: IP20
Operating temperature: 10°C to 35°C (50°F to 95°F)
Humidity: 0 to 50%
Altitude: 2000 m (6561.66 ft.)
Power: 6 Vdc
, 2.5 A
Charging LED: Color-coded LED indicates charging, charge
complete, and charger fault
Charge time: Typically 2-6 hours
Pollution Degree: 2
Installation Category: I
This device complies with the FCC Part 15 and ICES-003
Canadian EMI requirements. Operation is subject to the follow-
ing two conditions:
1.
This device may not cause harmful interference, and
2.
this device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules and ICES-003 Canadian EMI requirements.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment.
This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his/her own expense.
This symbol indicates that the product must not be disposed of
as general industrial or domestic waste. This product should
be disposed of through suitable WEEE disposal facilities. For
more information about disposal of this product, contact your
local authority, distributor or the manufacturer.
MicroDock II
Charger Specifications
19
Advertisement
Table of Contents
