Honeywell BW MicroDock II Quick Reference Manual page 13

Deactivating the Station
To deactivate the station, complete the following:
1. Access the normal operation screen (the station can
only deactivate from the normal operation screen).
2. Press C off.
Confirm Inlet Setup
For initial station activation, ensure the inlets are installed cor-
rectly.
• Inlet 1—default connection for ambient air.
• Inlet 2—default connection for four-gas mix (unless oth-
erwise specified when purchased).
• Inlets 3-5—designed connection for additional gases.
However, unless specified at purchase, inlets 3-5 will be
configured for ambient air.
a
Failed bump tests and calibrations can result if the inlets
are not setup correctly.
To confirm that the inlets are setup correctly, complete the fol-
lowing:
1. Press C menu to access the user options menu.
Warning
2. Press C or
3. Press C sel to access the inlet 1 screen.
4. Press the C
screens.
5. Press C exit to return to normal operation.
For more information on inlet setup, gas types, and concentra-
tion levels, refer to Inlet Setup in the MicroDock II Base Station
User Manual.
MicroDock II
Using the Base Station
to scroll to InletSetup.
to scroll to the inlet 2, 3, 4, and 5
11