Honeywell BW MicroDock II Quick Reference Manual page 11

station LCD displays the docking module number, and
the type and serial number of the detector.
Note
When the detector is inserted, the base station LCD
displays GasAlertMicroClip.
Use the serial number prefix to differentiate between
GasAlertMicroClip (KA1, KA2, KA3) and
GasAlertMicroClip XT (KA4)
GasAlertMax XT / GasAlertMax XT II
• Insert the bottom of the detector (serial number face up)
at a 30° angle into the detector bay.
The docking module lid only raises upward 30°. Do
not force the lid beyond its limit.
• Close the lid and press until the release tabs click. Push
the pump connector towards the detector pump.
Ensure the arrow on the dock is aligned with the guides
on the pump connector.
The detector briefly alarms when the pump connector
is connected. This is normal. The alarm deactivates
when the detector is properly inserted into the
docking module.
MicroDock II
Inserting the Detector
Note
Note
9