Your Phone
Connect to Expressway
You can use Mobile and Remote Access Through Expressway to connect to your corporate network when
you are working away from your office.
Procedure
Step 1
Reset service mode through Settings > Admin Settings > Reset Settings > Service mode.
Step 2
Press Select when prompted to change the service mode.
Step 3
Enter the service domain and press Continue.
Step 4
Enter your username and password.
Step 5
Select Sign in.
Install the Wired Expansion Microphones
The conference phone supports an optional kit with two wired expansion microphones. You can extend the
microphones up to 7 feet (2.13m) from the phone. For best results, we recommend that the microphones be
placed at least 3 feet (0.91m) away from the phone.
Note
You must use either two wired microphones or two wireless microphones with the phone, but not a mixed
combination.
Procedure
Step 1
Plug the end of the microphone cable into the port on the side of the conference phone.
Step 2
Extend the microphone cable to the desired position.
The following figure shows installation of a wired expansion microphone.
Cisco IP Conference Phone 8832 User Guide
Connect to Expressway
7