Editing A Numeric Value - Honeywell SmartLine ST 700 User Manual

5.2.3 Editing a Numeric value

Editing of a numeric value is a digit-by-digit process, starting with the left-most digit.

1. Press to begin the edit process.
2. The basic display will show the current value of the item on the lower line, left justified.
3. Press the  or  buttons to select the desired digit, and then press
digit to the right.
4. After the last digit has been entered, press  one more time to write the new value to the
transmitter.
Revision 13
ST 700 SmartLine Pressure Transmitters User's Manual

to advance to the next
Page 49