Summary; Figure 4 - St 700 Standard Transmitter - Typical Bracket And Flange Mounted Installations - Honeywell SmartLine ST 700 User Manual

4.4.1 Summary

The ST 700 standard transmitter models, except flush mounts and those with integral flanges, can be
attached to a two-inch (50 millimeters) vertical or horizontal pipe using Honeywell's optional angle
or flat mounting bracket; alternately you can use your own bracket. flush-mount models are attached
directly to a process pipe or tank by a one-inch weld nipple. Models with integral flanges are
supported by the flange connection.
Figure 4 shows a typical bracket-mounted and flange-mounted transmitter installations.
Figure 4 – ST 700 Standard Transmitter - Typical Bracket and Flange
Mounted Installations
ST 700 SmartLine Pressure Transmitters User's Manual
Page 14 Revision 13