Honeywell ST 3000 Addendum

ST 3000 Smart Transmitter
Release 300 with HART
Option
Overview
Related
Publications
04/03
®
Communications
Replacement Meterbody and Heads for Model STD 110
The ST 3000 Pressure Transmitter (Model STD110) is now being shipped with newly
designed meter body and process heads. If a replacement meter body is needed, it
should be ordered from the Model Number stated on the meter body nameplate. This
meter body replacement number will start with STD110S-xxx...
This new transmitter is functionally identical to previous models, with the same
specifications and intended applications (Draft Range: 10" H
The new version, which will continue as Model STD110, differs only in the physical
size and form of the meter body, process head, and associated components.
With exceptions noted in this addendum, information given in User's Manual
34-ST-25-17A applies also to this newer design.
Installation, operation, maintenance, calibration, and troubleshooting tasks remain
virtually the same as for the previous version. Differences appear primarily in torque
specifications when replacing meter bodies, and in part numbering and part
recognition when replacing components or assemblies.
This addendum provides details for parts replacement that span a variety of
applications of the Model STD110. For applicability of parts for specific options
available for the newer design of the Model STD110, refer to:
For availability and applicability of parts, refer to:
ST 3000 Smart Transmitter
Series 100 Differential Pressure Models
Specification and Model Selection Guide
34-ST-03-60
34-ST-99-20 (Addendum to 33-ST-25-17A)
34-ST-99-20
04/03
Addendum
User Manual
(to
34-ST-25-17A)
O [25 mbar]).
2
1 of 6