10. Introduction – ST 700 Basic Transmitter
10.1 Overview
This section is an introduction to the physical and functional characteristics Honeywell's family of
the ST 700 basic SmartLine pressure transmitters.
If you are not sure which type of ST 700 you have, standrad or basic, please refer to
manual
If you have a ST 700 standard transmitter, use Sections
If you have a ST 700 basic transmitter, use Sections
10.2 Features and Options
The ST 700 basic transmitter is available in a variety of models for measuring Differential Pressure
(DP), Gauge Pressure (GP), and Absolute Pressure (AP). Table 28 lists the protocols, human interface
(HMI), materials, approvals, and mounting bracket options for the ST 700.
Table 28 – ST 700 Basic Transmitter - Features and Options
Feature/Option
Communication Protocols
Human-Machine Interface (HMI)
Options (Standard Display/External
Two buttons)
Calibration
Approvals
Appendix AAppendix
See
Appendix A
A Appendix A
for details.
Mounting Brackets
Integration Tools
The 2-button option is available for the standard display.
The external 2-buttons option is available in this model.This is used for navigation of
standard display or for setting zero, span and zero correct where standard display is
not connected.
Revision 13
HART
Standard Display (HART
•
•
•
Single.
FM, CSA, ATEX, IECEx, SAEx, INMETRO, NEPSI,
GOST.
Angle/flat carbon steel/304 and 316 stainless steel.
Experion.
ST 700 SmartLine Pressure Transmitters User's Manual
2
through 9.
10
through
17.
Basic/Available Options
version 7.
only):
Two-button programming (optional).
Standard display language: English and Russian
only.
Two-mode operations: PV display and menu
navigation.
Section 1
of this
Page 119