Editing A Numeric Value; Selecting A New Setting From A List Of Choices; Table 5 - Three-Button Data Entry - Honeywell stt850 SMARTLINE User Manual

All numeric entries are clamped at the low or high limit if needed. You can determine the low and
high limit for a parameter by selecting either the ▲ or ▼ character while the cursor is positioned over
the left-most digit and press
Screen
Symbol
Display the high limit for this parameter.
▲
This symbol only appears in the left-most
position of the data entry field.
Display the low limit for this parameter.
▼
This symbol only appears in the left-most
position of the data entry field.
▒
Terminate the numeric entry
0 thru 9, These characters are used to enter
Minus, numeric values. The minus sign only
Decimal appears in the left-most digit.
A thru Z,
0 thru 9
Not Available
special
symbols

4.1.3 Editing a Numeric Value

Editing a Numeric Value
Editing of a numeric value is a digit-by-digit process, starting with the left-most digit.

1. Press to begin the edit process.
2. The Basic Display will show the current value of the item on the lower line, left justified. The
Advanced Display will show the current value of the item in a pop-up window in the middle
of the screen
3. Press the  or  buttons to select the desired digit, and then press
digit to the right.
4. After the last digit has been entered, press  one more time to write the new value to the
transmitter.

4.1.4 Selecting a new setting from a list of choices

Use the procedure described below to select a new setting for parameters that present a list of choices
(e.g., Screen Format, Display Units, etc.).

1. Press to begin the edit process.
a. The Basic Display will show the current setting of the item on the lower line, left
justified.
b. The Advanced Display will show the current setting of the item in a pop-up window.
2. Press the  or  buttons to scroll through the list of choices.

3. Press to make your selection. The new selection will be stored in the transmitter and will
be displayed on the lower line, right justified.
Revision 3

button. The Display will show the selected limit.
Table 5 – Three-Button Data Entry
Numeric data entry
STT850 Temperature Transmitter User's Manual
Text entry
Not Available
Not Available
Terminate the text entry
These characters can be used to
create custom tags and unit labels
These characters can be used to
create custom tags and unit labels

to advance to the next
Page 23