Editing A Numeric Value - Honeywell SmartLine ST 700 User Manual

13.2.4 Editing a Numeric value

Editing a numeric value is a digit-by-digit process, starting with the left-most digit.

1. Press to begin the edit process.
2. The standard display will show the current value of the item on the lower line, left justified.
3. Press the  buttons to select the desired digit, and then press
to the right.
4. After the last digit has been entered, press  one more time to write the new value to the
transmitter.
Revision 12
ST 700 SmartLine Pressure Transmitters User's Manual

to advance to the next digit
Page 199