Dot1X Max-Req; No Dot1X Max-Req; Dot1X Port-Control - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Format
Mode

dot1x max-req

This command sets the maximum number of times the authenticator state machine on this port will
transmit an EAPOL EAP Request/Identity frame before timing out the supplicant. The <count>
value must be in the range 1 - 10.
Default
Format
Mode

no dot1x max-req

This command sets the maximum number of times the authenticator state machine on this port will
transmit an EAPOL EAP Request/Identity frame before timing out the supplicant to the default
value, i.e. 2.
Format
Mode

dot1x port-control

This command sets the authentication mode to be used on the specified port. The control mode
may be one of the following.
• force-unauthorized: The authenticator PAE unconditionally sets the controlled port to
unauthorized.
• force-authorized: The authenticator PAE unconditionally sets the controlled port to
authorized.
• auto: The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator and the authentication server.
Default
Format
Mode
8-96
dot1x login <user> <listname>
Global Config
2
dot1x max-req <count>
Config
Interface
no dot1x max-req
Interface Config
auto
dot1x port-control {force-unauthorized | force-authorized | auto}
Interface Config
December 2004, 202-10010-02
Switching Commands