Port-Channel Name; Protocol Group; No Protocol Group; Protocol Vlan Group - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Mode

port-channel name

This command defines a name for the port-channel (LAG). The interface is a logical slot and port
for a configured port-channel, and name is an alphanumeric string up to 15 characters. This
command is used to modify the name that was associated with the port-channel when it was
created.
Format
Mode

protocol group

This command attaches a <vlanid> to the protocol-based VLAN identified by <groupid>. A group
may only be associated with one VLAN at a time, however the VLAN association can be changed.
Default
Format
Mode

no protocol group

This command removes the <vlanid> from this protocol-based VLAN group that is identified by
this <groupid>.
Format
Mode

protocol vlan group

This command adds the physical <slot/port> interface to the protocol-based VLAN identified by
<groupid>. A group may have more than one interface associated with it. Each interface and
protocol combination can only be associated with one group. If adding an interface to a group
causes any conflicts with protocols currently associated with the group, this command will fail and
the interface(s) will not be added to the group.
Default
Format
8-42
GlobalConfig
port-channel name {<logical slot/port> | all} <name>
Global Config
none
protocol group <groupid> <vlanid>
VLAN database
no protocol group <groupid> <vlanid>
VLAN database
none
protocol vlan group <groupid>
December 2004, 202-10010-02
Switching Commands