User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
exclude
auto
vlan participation all
This command configures the degree of participation for all interfaces in a VLAN. The ID is a
valid VLAN identification number
Format
Mode
Participation options are:
include
exclude
auto
vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces. For VLAN Only mode, untagged
frames or priority frames received on this interface are discarded. For Admit All mode, untagged
frames or priority frames received on this interface are accepted and assigned the value of the
interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in
accordance with the IEEE 802.1Q VLAN Specification.
Default
Format
Mode
8-72
The interface is never a member of this VLAN. This is equivalent
to registration forbidden.
The interface is dynamically registered in this VLAN by GVRP.
The interface will not participate in this VLAN unless a join
request is received on this interface. This is equivalent to registra-
tion normal.
.
vlan participation all {exclude | include | auto} <1-
4094>
Global Config
The interface is always a member of this VLAN. This is equiva-
lent to registration fixed.
The interface is never a member of this VLAN. This is equivalent
to registration forbidden.
The interface is dynamically registered in this VLAN by GVRP.
The interface will not participate in this VLAN unless a join
request is received on this interface. This is equivalent to registra-
tion normal.
Admit All
vlan port acceptframe all {vlanonly | all
Global Config
December 2004, 202-10010-02
}
Switching Commands