User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
network javamode
This command specifies whether or not the switch should allow access to the Java applet in the
header frame of the Web interface. When access is enabled, the Java applet can be viewed from the
Web interface. When access is disabled, the user cannot view the Java applet.
Default
Format
Mode
no network javamode
This command disallows access to the Java applet in the header frame of the Web interface. When
access is disabled, the user cannot view the Java applet.
Format
Mode
network mac-address
This command sets locally administered MAC addresses. The following rules apply:
•
Bit 6 of byte 0 (called the U/L bit) indicates whether the address is universally administered
(b'0') or locally administered (b'1').
•
Bit 7 of byte 0 (called the I/G bit) indicates whether the destination address is an individual
address (b'0') or a group address (b'1').
•
The second character, of the twelve character macaddr, must be 2, 6, A or E.
A locally administered address must have bit 6 On (b'1') and bit 7 Off (b'0').
Format
Mode
network mac-type
This command specifies whether the burned in MAC address or the locally-administered MAC
address is used.
Default
Format
Switching Commands
Enabled
network javamode
Privileged EXEC
no network javamode
Privileged EXEC
network mac-address <macaddr>
Privileged EXEC
burnedin
network mac-type {local | burnedin}
December 2004, 202-10010-02
8-19