Dhcp Server Commands; Dhcp Server Configuration Commands; Client-Identifier; No Client-Identifier - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

DHCP Server Configuration Commands

These commands configure the DHCP Server parameters and address pools.

client-identifier

This command specifies the unique identifier for a DHCP client. Unique-identifier is a valid
notation in hexadecimal format.
Default
Format
Mode

no client-identifier

This command deletes the client identifier.
Format
Mode

client-name

This command specifies the name for a DHCP client. Name is a string consisting of standard
ASCII characters.
Default
Format
Mode

no client-name

This command removes the client name.

DHCP Server Commands

DHCP Server Commands
None
client-identifier <uniqueidentifier>
DHCP Pool Config Mode
no client-identifier
DHCP Pool Config Mode
None
client-name <name>
DHCP Pool Config Mode
December 2004, 202-10010-02
Chapter 9
9-1