Show Interface Ethernet - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Address Entries Currently In Use The total number of Forwarding Database Address
VLAN Entries Currently In Use The number of VLAN entries presently occupying the
Time Since Counters Last Cleared The elapsed time, in days, hours, minutes, and sec-

show interface ethernet

This command displays detailed statistics for a specific port or for all CPU traffic based upon the
argument.
Format
Mode
The display parameters when the argument is ' <slot/port>' is as follows:
Packets Received
8-4
Table entries now active on the switch, including learned and
static entries.
VLAN table.
onds since the statistics for this switch were last cleared.
show interface ethernet {<slot/port> | switchport}
Privileged EXEC
Octets Received - The total number of octets of data (including
those in bad packets) received on the network (excluding framing
bits but including FCS octets). This object can be used as a rea-
sonable estimate of ethernet utilization. If greater precision is
desired, the etherStatsPkts and etherStatsOctets objects should be
sampled before and after a common interval. ----- The result of
this equation is the value Utilization which is the percent utiliza-
tion of the ethernet segment on a scale of 0 to 100 percent.
Packets Received < 64 Octets - The total number of packets
(including bad packets) received that were < 64 octets in length
(excluding framing bits but including FCS octets).
Packets Received 64 Octets - The total number of packets
(including bad packets) received that were 64 octets in length
(excluding framing bits but including FCS octets).
Packets Received 65-127 Octets - The total number of packets
(including bad packets) received that were between 65 and 127
octets in length inclusive (excluding framing bits but including
FCS octets).
Packets Received 128-255 Octets - The total number of packets
(including bad packets) received that were between 128 and 255
December 2004, 202-10010-02
Switching Commands