Show Spanning-Tree Mst Port Summary - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Designated Port Identifier
Topology Change Acknowledgement
Hello Time
Edge Port
Edge Port Status
Point To Point MAC Status
CST Regional Root
CST Port Cost

show spanning-tree mst port summary

This command displays the settings of one or all ports within the specified multiple spanning tree
instance. The parameter <mstid> indicates a particular MST instance. The parameter {<slot/port> |
all} indicates the desired switch port or all ports.
If 0 (defined as the default CIST ID) is passed as the <mstid>, then the status summary is
displayed for one or all ports within the common and internal spanning tree.
Format
Mode
MST Instance ID
Slot/Port
Type
STP State
Port Role
Link Status
Link Trap
8-80
Port on the Designated Bridge that offers the lowest cost to
the LAN
Value of flag in next Configuration Bridge Pro-
tocol Data Unit (BPDU) transmission indicating if a topology
change is in progress for this port.
The hello time in use for this port.
The configured value indicating if this port is an edge port.
The derived value of the edge port status. True if operating as an
edge port; false otherwise.
Derived value indicating if this port is part of a point to
point link.
The regional root identifier in use for this port.
The configured path cost for this port.
show spanning-tree mst port summary <mstid> {<slot/port> | all}
Privileged EXEC and User EXEC
The MST instance associated with this port.
The interface being displayed
Currently not used.
The forwarding state of the port in the specified spanning tree
instance
The role of the specified port within the spanning tree.
The operational status of the link. Possible values are "Up" or
"Down".
The link trap configuration for the specified interface.
December 2004, 202-10010-02
Switching Commands