No Dot1X Port-Control; Dot1X Port-Control All; No Dot1X Port-Control All; Dot1X Re-Authenticate - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

no dot1x port-control

This command sets the authentication mode to be used on the specified port to 'auto'.
Format
Mode

dot1x port-control All

This command sets the authentication mode to be used on all ports. The control mode may be one
of the following.
• force-unauthorized: The authenticator PAE unconditionally sets the controlled port to
unauthorized.
• force-authorized: The authenticator PAE unconditionally sets the controlled port to
authorized.
• auto: The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator and the authentication server.
Default
Format
Mode

no dot1x port-control All

This command sets the authentication mode to be used on all ports to 'auto'.
Format
Mode

dot1x re-authenticate

This command begins the re-authentication sequence on the specified port. This command is only
valid if the control mode for the specified port is 'auto'. If the control mode is not 'auto' an error
will be returned.
Format
Mode
Switching Commands
no dot1x port-control
Interface Config
auto
dot1x port-control all {force-unauthorized | force-authorized |
auto}
Global Config
no dot1x port-control all
Global Config
dot1x re-authenticate <slot/port>
Privileged EXEC
December 2004, 202-10010-02
8-97