No Spanning-Tree Port Mode; Spanning-Tree Port Mode All; No Spanning-Tree Port Mode All; User Account Management Commands - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

no spanning-tree port mode

This command sets the Administrative Switch Port State for this port to disabled.
Format
Mode

spanning-tree port mode all

This command sets the Administrative Switch Port State for all ports to enabled.
Default
Format
Mode

no spanning-tree port mode all

This command sets the Administrative Switch Port State for all ports to disabled.
Format
Mode

User Account Management Commands

These commands manage user accounts.

disconnect

This command closes a telnet session.
Format
Mode

show loginsession

This command displays current telnet and serial port connections to the switch.
Format
Switching Commands
no spanning-tree port mode
Interface Config
Disabled
spanning-tree port mode all
Global Config
no spanning-tree port mode all
Global Config
disconnect {<sessionID> | all}
Privileged EXEC
show loginsession
December 2004, 202-10010-02
8-89