No Vlan Port Acceptframe All; Vlan Port Ingressfilter All; No Vlan Port Ingressfilter All; Vlan Port Pvid All - NETGEAR ProSafe GSM7212 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

no vlan port acceptframe all

This command sets the frame acceptance mode for all interfaces to Admit All. For Admit All
mode, untagged frames or priority frames received on this interface are accepted and assigned the
value of the interface VLAN ID for this port. With either option, VLAN tagged frames are
forwarded in accordance with the IEEE 802.1Q VLAN Specification.
Format
Mode

vlan port ingressfilter all

This command enables ingress filtering for all ports. If ingress filtering is disabled, frames
received with VLAN IDs that do not match the VLAN membership of the receiving interface are
admitted and forwarded to ports that are members of that VLAN.
Default
Format
Mode

no vlan port ingressfilter all

This command disables ingress filtering for all ports. If ingress filtering is disabled, frames
received with VLAN IDs that do not match the VLAN membership of the receiving interface are
admitted and forwarded to ports that are members of that VLAN.
Format
Mode

vlan port pvid all

This command changes the VLAN ID for all interface.
Default
Format
Mode

no vlan port pvid all

This command sets the VLAN ID for all interfaces to 1.
Switching Commands
no vlan port acceptframe all {vlanonly | all
Global Config
Disabled
vlan port ingressfilter all
Global Config
no vlan port ingressfilter all
Global Config
1
vlan port pvid all <1-4094>
Global Config
December 2004, 202-10010-02
}
8-73