User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software
Format
Mode
MAC Address
VLAN ID
Source Port(s)
Destination Port(s)
show mac-address-table staticfiltering
This command displays the Static Filtering entries in the Multicast Forwarding Database (MFDB)
table.
Format
Mode
Mac Address
Type
Description
Interfaces
show mac-address-table stats
This command displays the Multicast Forwarding Database (MFDB) statistics.
Format
Mode
Total Entries
8-58
show mac-address-table static {<macaddr> <vlanid> |
all}
Privileged EXEC
Is the MAC Address of the static MAC filter entry.
Is the VLAN ID of the static MAC filter entry.
Indicates the source port filter set's slot and port(s).
Indicates the destination port filter set's slot and port(s).
show mac-address-table staticfiltering
Privileged EXEC
A unicast MAC address for which the switch has forwarding and
or filtering information. The format is 6 or 8 two-digit hexadeci-
mal numbers that are separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address will be
displayed as 8 bytes. In an SVL system, the MAC address will be
displayed as 6 bytes.
This displays the type of the entry. Static entries are those that are
configured by the end user. Dynamic entries are added to the
table as a result of a learning process or protocol.
The text description of this multicast table entry.
The list of interfaces that are designated for forwarding (Fwd:)
and filtering (Flt:).
show mac-address-table stats
Privileged EXEC
This displays the total number of entries that can possibly be in
the Multicast Forwarding Database table.
December 2004, 202-10010-02
Switching Commands