Training Through Voiceconsole's Display; Training Using A Printed List Of Words - Honeywell Vocollect Talkman A700 Product Manual

86 | Vocollect Talkman A700 Product Guide
The Talkman device stops speaking and words to train are only displayed on the screen. Speak the words
as they appear on the device display. Words appear in random order and are repeated at least four times to
get an accurate recording of how you speak the words. If it prompts you for phrases, say the phrase naturally,
without exaggerated pauses between the words.
When the device has asked for all words in the task the necessary number of times, the device will say,
"Creating voice templates. Please wait." It will then beep periodically until all of the remaining voice templates
have been created.
During the beeping, the device periodically repeats the "... Please wait" phrase to alert the user that it is still
busy. When the remaining voice templates have been created, the device says, "Finished creating voice
templates." The device then goes to sleep. You can begin the task by pressing the Play/Pause button.
You can expect the device to beep for approximately two minutes after all of the vocabulary words have been
spoken. If the operator presses any of the device's buttons during this time period, the device says, "Creating
voice templates. Please wait."
Disconnect the training device and begin your task by pressing the Play/Pause button.

Training through VoiceConsole's Display

Note: Supported when using VoiceConsole 3.0 or newer with VoiceClient 3.5 and newer and VoiceCatalyst
MP 1.0 and newer.
You can view the words the device asks you to train on a computer screen, through the user interface, or
pocket PC device screen as you go through the training process. See Viewing Dialog Between a Device and
an Operator in the VoiceConsole online help for more information.

Training Using a Printed List of Words

If you suspect operators may have a difficult time recognizing the words the device is speaking during training,
you can create a print out of the words used in the task that the device will ask the operators to train.
Note: This method is supported when using VoiceConsole 3.1 or newer.
1. If a current operator has previously performed the task the new operator is going to use, go to VoiceConsole
and perform the steps for viewing an operator's voice templates using the current operator. See Managing
Operator Numbers in the VoiceConsole online help for more information.
2. On the Manage Operator Templates:<operator name> page in VoiceConsole, print the list of trained words.
See Viewing Printable Versions of List Data in the VoiceConsole online help.
3. If necessary, on the printed list, circle commonly misheard or confusing words.
Confidential: For informational use by Honeywell resellers and customers only