Cleaning Contacts - Honeywell Vocollect Talkman A700 Product Manual

30 | Vocollect Talkman A700 Product Guide
Air dry the parts. Use of a concentrated heat source such as a hairdryer or clothes dryer is not recommended.
Replace pads that are excessively dirty, such as headset windscreens.

Cleaning Contacts

Clean flat contacts on the device, such as the Talkman Connector (TCO), or flat contacts on the battery and
charger with a 70% isopropyl alcohol solution.
Use a soft, lint-free cloth or premoistened alcohol wipe. Avoid using a cloth with long or thick fibers as the
fibers can attach to the connectors and cause intermittent contact.
Remove corrosion with a soft eraser (for example, a pencil eraser). The eraser must be in good condition
(soft, pliable, and not worn down to the mounting). A good test is to rub the eraser against your skin. If it feels
abrasive, do not use it, because it will damage the surface of the connectors.
You can also use a three-row cleaning brush with natural hog hair bristles to gently brush away dirt on the
contacts. A final alcohol wipe after this should ensure a clean contact.
Never bend or manipulate battery contacts.
Contact an authorized Vocollect Service Center to repair or replace contacts that are extremely corroded,
bent, or missing.
Confidential: For informational use by Honeywell resellers and customers only