Installing The Usb Driver On Windows Xp; Installing The Usb Driver On Windows 7 Or Vista - Honeywell Vocollect Talkman A700 Product Manual

28 | Vocollect Talkman A700 Product Guide
1. Hold the Talkman A730 in a "handshake" grip with the scanner pointing away from you.
2. Position the device so that the scanner is 4 to 36 inches away from the barcode you want to read. Note
that scan accuracy may decrease at greater distances.
3. Press and hold the round black button to activate the scanner.
4. Direct the lighted aiming frame so that it completely contains the barcode.
5. When a scan is successful, the aiming frame will turn off and you will hear a beep in the headset.
Note: The beep that signals a scan is enabled by default but can be disabled by setting
EnableBeepOnBarcodeScan to 0. The beep volume is controlled by the device volume and can be
adjusted with the Plus (+) and Minus (-) buttons on the device.

Installing the USB Driver on Windows XP

When you connect an A700 device to your Windows PC, the PC will search for a USB driver to install. If the
PC is configured to search for drivers online and the connection succeeds, the driver will install automatically
and the A700 device will be ready to use. If the automatic installation fails, follow these steps.
1. Navigate to the .inf and .cat files in the USB Driver folder on the VoiceConsole software DVD and save
both files to your computer.
2. Open Device Manager and locate Talkman USB Serial.
3. Right click it and select Update Driver.
4. When prompted with Can Windows connect to Windows Update to search for software?, select No,
not at this time.
5. Select Install from a list or specific location (advanced).
6. Click Have Disk. Navigate to the location where you saved the .inf and .cat files.
7. Select the TalkmanUsbSerial.inf file. If there is a driver warning, click Continue Anyway.

Installing the USB Driver on Windows 7 or Vista

When you connect an A700 device to your Windows PC, the PC will search for a USB driver to install. If the
PC is configured to search for drivers online and the connection succeeds, the driver will install automatically
and the A700 device will be ready to use. If the automatic installation fails, follow these steps.
1. Navigate to the .inf and .cat files in the USB Driver folder on the VoiceConsole software DVD and save
both files to your computer.
2. Open Device Manager and locate Talkman USB Serial.
3. Right click it and select Update Driver.
4. Select Browse my computer for driver software.
5. Select Let me pick from a list of device drivers on my computer.
6. Click Have Disk. Navigate to the location where you saved the .inf and .cat files.
7. Select the TalkmanUsbSerial.inf file. If there is a driver warning, or a prompt about proceeding, indicate
that you want to continue.
Confidential: For informational use by Honeywell resellers and customers only