Vehicle Mounts For Talkman A700; Positioning The Talkman A700 Vehicle Dock; Installing The Mounting Brackets For A Talkman A700 Vehicle Dock - Honeywell Vocollect Talkman A700 Product Manual

Belt fastener

Vehicle Mounts for Talkman A700

The Screw-on Mount is a mounting option that is bolted to a stationary surface on a vehicle.
The Clamp Mount is a mounting option that is clamped to a stationary surface on a vehicle. This can also be
bolted to a stationary surface, if desired.
The Claw Mount is also clamped to a stationary surface, but can be clamped to oddly-shaped or horizontal
or vertical surfaces.
Figure 17: Screw On Mount

Positioning the Talkman A700 Vehicle Dock

• Determine the best position for the device and all the associated components. If a similar device was
previously installed, check to see if the position it used is suitable for the device.
• Check that the position of the device does not obstruct vehicle controls.
• Check that the device does not obstruct the driver's view.
• Check the position of the device for user comfort over long periods.

Installing the Mounting Brackets for a Talkman A700 Vehicle Dock

The following parts are supplied by Vocollect for attaching the screw-on mount:
Quantity
2
1
1
The following parts are supplied by Vocollect for attaching the clamp-on mount:
Quantity
1
1
Figure 18: Clamp Mount
Description
Vehicle Mount, Holder/Base Screw On Attachment
Vehicle Mount, Arm
Vehicle Mount, Holder
Description
Vehicle Mount, Clamp
Vehicle Mount, Arm
Confidential: For informational use by Honeywell resellers and customers only
Non-replacable
Accessories | 39
Figure 19: Claw Mount