Honeywell Vocollect Talkman A700 Product Manual page 40

40 | Vocollect Talkman A700 Product Guide
Quantity
1
1
The following parts are supplied by Vocollect for attaching the claw mount:
Quantity
1
1
1
1
1. Drill the holes required to secure the base to the vehicle. If using the clamp or claw mount, skip this step.
Note: Apply some lubricant (for example, light oil or anti-seize) to the threads of the clamp mount screws.
2. Screw or clamp a base to the location.
3. Attach the other base to the other end of the arm and tighten once in the desired location by turning the
locking lever clockwise.
4. Screw the device holder to the base.
5. Insert a device into the holder.
To prevent vibration, the arm of the mounting bracket should not touch the stem of the ball of the base.
In other words, the arm should not be tilted so far as to have these pieces touching.
Confidential: For informational use by Honeywell resellers and customers only
Description
Vehicle Mount, Holder
Vehicle Mount, Holder/Base Screw On Attachment
Description
Vehicle Mount, Claw
Vehicle Mount, Arm
Vehicle Mount, Holder
Vehicle Mount, Holder/Base Screw On Attachment