Numbered Error Messages - Honeywell Vocollect Talkman A700 Product Manual

44 | Vocollect Talkman A700 Product Guide

Numbered Error Messages

Number
0x020a
0x0203
0x0206
0x0207
0x0208
0x0602
0x0603
0x0605
0x060c
0x060e
0x0802
0x0804
0x1201
0x1202
0x1203
0x1204
0x1205
0x1206
0x1207
0x1208
0x1209
0x120a
0x120b
Confidential: For informational use by Honeywell resellers and customers only
Text
Event detect initialization failed.
Event control failed to create shared
data module.
Battery is getting low.
Battery is getting low. Change
battery now.
Battery is very low. Powering off.
Must replace battery after power off
complete.
Noise sampling procedure failed.
Noise sampling procedure timed out.
Invalid operator file name.
Train returned bad status to
UpdTrain.
Unable to train words. Not enough
free flash memory.
Speak failed to initialize properly.
Speech-out failed. Audio system
failure.
Dialog power-off failed.
Task not loaded. No task name
available.
OperLoad failed -- TmplSend busy.
Operator load failed.
Corrupted operator data.
Noise sample failed.
There are no operators in this team.
Unable to retrieve operator files.
Internal error loading operator.
Task load failed.
Self test mode set, but no script file
found.
Solution
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
Change the battery.
—
—
—
1. Turn the device off and then turn it back on again.
2. Reboot the device.
3. Reload VoiceClient.
—
1. Check the crashdump file. For more information,
see the VoiceConsole online help.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
4. Reload VoiceClient.
—
—
—
—
—
—
—
—
—
—