Inserting A Battery Into A Talkman A700 Device; Removing A Battery From A Talkman A700 Device - Honeywell Vocollect Talkman A700 Product Manual

• If you insert a fully charged battery into a charger, the charger will analyze the battery's status and
indicate charge status immediately.
1. Make sure the battery charger is powered. To power on the charger, connect the power supply to the
charger and a power source. The LED indicator light at the bottom right of the charger face panel should
be solid green.
2. Power off the device.
3. Remove the battery from the device.
4. Hold the battery with the pins downward and facing away from you, and push it onto an empty port on the
battery charger until it snaps into place.
5. When the ring LED indicator turns a solid green, the battery is fully charged. Pull the battery off the charger
port to insert it into an A700 device.

Inserting a Battery into a Talkman A700 Device

Make sure the battery to be inserted is fully charged.
1. Hold the Talkman so that the battery compartment is facing up.
2. Hold the battery with the rounded side up.
3. Place the battery in at an angle, pins end first.
4. Push the back of the battery into place.
You will hear a click when the battery is in place.
Caution: Do not force the battery into the compartment. You may damage the battery or the device.
If the battery does not snap easily into place, reposition the battery in the compartment and try again.
Make sure the battery is firmly in place and can't be removed without pressing the battery release button.
Warning: Replace a battery only with another battery that has been authorized by Honeywell for the
product you are using. Use of an unqualified battery may present a risk of fire, explosion, leakage, or
other hazard. See also

Removing a Battery from a Talkman A700 Device

Make sure the Talkman device is off.
Caution: Do not remove the battery until the LED indicator is off. If you remove the battery when the
device is on or sleeping, any data collected could be lost.
1. Hold the device in one hand.
2. Press the battery release button all the way down until the top of the battery pops out from the battery
compartment.
Honeywell Battery Safety
Confidential: For informational use by Honeywell resellers and customers only
Using the Talkman A700 Device | 17