Honeywell Vocollect Talkman A700 Product Manual page 82

82 | Vocollect Talkman A700 Product Guide
Registry Key
CenterDecodingTolerance
[HKEY_LOCAL_MACHINE\Software\Vocollect\Imager\Imager] - Imager Configuration
DecodeMode
AimerFlashing
Initial1DSearchArea
DPMMode
Damaged1DCodes
ExtensiveBarcodeSearch
Confidential: For informational use by Honeywell resellers and customers only
Default Value Description
0x0 Amount of tolerance for what is considered the "center".
Range is 0x0 - 0x64 (0 to 100), where "0x0" is the least
tolerant (must be aimed exactly).
0x1 Decoding mode, where 0 = linear imager emulation, and 1
= 2D imager.
0x1 Aimer mode, where 0 = on, 1 = decode optimized (flashing
at frame rate), and 2 = off.
0x0 For 1D barcodes, sets the initial search area. 0 = center, 1
= upper half, 2 = lower half, 3 = full, 4 = "smart raster" (better
for non-horizontal).
0x0 Enhances the ability to read a DPM (Direct Product Marking)
barcode where the barcode is marked directly on the
product.
0x0 Enhances the ability to read damaged or badly printed 1D
barcodes.
0x0 The decoding algorithms spend more time trying to find a
barcode.