Training Using A Visual Training Device - Honeywell Vocollect Talkman A700 Product Manual

4. On the training device, press and hold the 1 key.
5. Still holding the 1 key, press the device's yellow play/pause button.
6. Contrast appears on the training device screen.
7. On the training device, press:
• 1 to increase the contrast
• 2 to decrease the contrast
• 3 to accept the current setting
After you press 3, Baud Rate appears on the training device screen.
8. On the training device, press 1 until a baud rate of 9600 appears on the screen.
9. Press 3 to accept the baud rate setting.
Bits appears on the training screen.
10. On the training device, press 3 to accept 8 as the bits setting.
Parity appears on the training screen.
11. On the training device, press 3 to accept "n" (None) as the parity setting.
Stop Bits appears on the training device screen.
12. On the training device, press 3 to accept 1 as the stop bits setting.
13. On the Talkman device, press the yellow play/pause button to turn the device on.
The device will take a background noise sample and begin training.

Training Using a Visual Training Device

Vocollect recommends using a browser-based mobile display with Talkman A500 or A700 devices, and the
QTERM-G55 with Talkman T5 or T2x devices.
Note: In order to use QTERM devices with a Thai TTS, you must use a QTERM-G55 running device
software version 3.1 or newer. After connecting the QTERM, verify you have the correct software by
checking debug logs for the message "TRAIN DEVICE: Device query detected training device G55 using
v3.1." If you do not see this message, you do not have the correct software, and you must obtain it to use
the device with a Thai TTS.
1. Be sure the training device is configured.
2. Connect the training device to your Talkman device.
3. Turn your Talkman device on by pressing the Play/Pause button.
The LED indicator turns red for a few moments then turns green. The training device displays, "Please
keep quiet for a few seconds."
Note:
• If your device does not say this, press the Operator button to manually perform a background noise
sample.
• If you cannot see words displayed on the training device screen, there may be a problem with the
contrast on the device. Refer to the manufacturer's documentation.
The Talkman device says and the training device displays, "Please say zero."
4. Say "Zero."
The Talkman device says and the training device displays, "One."
5. Say "One."
The Talkman device says and the training device displays, "Two."
6. Say "Two."
The Talkman device says, "Please say the following words as they appear on the screen."
Confidential: For informational use by Honeywell resellers and customers only
Template Training Options | 85