Honeywell Vocollect Talkman A700 Product Manual page 49

Error Message
"Corrupt task file. Task load failed."
"Corrupt device emulation config file. Task
load failed."
"Corrupted operator data."
"Failed to load lookup table. Task load
failed."
"Failed to load task audio file. Task load
failed."
"Failed to load task phonetic file. Task load
failed."
"Failed to load task VCF file. Task load
failed."
"Failed to load device emulation config file.
Task load failed."
"Failed to write the ODR NTI registration
file. Task load failed."
Solution
3. Reboot the device.
4. Reload VoiceClient.
1. Turn the device off and then turn it back on again.
2. Reload the task.
3. Reboot the device.
4. Reload VoiceClient.
Reload the operator.
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reload the task.
4. Reboot the device.
5. Reload VoiceClient.
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reload the task.
4. Reboot the device.
5. Reload VoiceClient.
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reload the task.
4. Reboot the device.
5. Reload VoiceClient.
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reload the task.
4. Reboot the device.
5. Reload VoiceClient.
1. Go to an area of known good coverage.
2. Turn the device off and then turn it back on again.
3. Reload the task.
4. Reboot the device.
5. Reload VoiceClient.
1. Reload the task.
2. Turn the device off and then turn it back on again.
3. Reboot the device.
Confidential: For informational use by Honeywell resellers and customers only
Troubleshooting Equipment Problems | 49