The Optical Bypass Module - Cisco SCE8000 Installation And Configuration Manual

Cisco systems router installation and configuration guide
Hide thumbs Also See for SCE8000:
Table of Contents

Advertisement

The Optical Bypass Module

The Optical Bypass Module
The external optical bypass module is an optional component that provides additional protection by
enabling automatic preservation of the network 10GBE link. For more information regarding the
external bypass module, refer to
There are two installation options for the optical bypass module:
Note
Make sure to use the correct type of optical bypass module (single-mode or multi-mode) according to
the transceivers and cabling that are used for the subscriber and network links.
Note
Since the optic bypass module will directly connect the subscriber and network side optic paths when
bypassing the SCE8000, the subscriber and network optic links must be of the same type (single-mode
or multi-mode) and wavelength.
Invisible laser radiation may be emitted from disconnected fibers or connectors. Avoid exposure to
Warning
radiation and do not stare into open aperture.
Cisco SCE8000 Installation and Configuration Guide, Rel 3.1.7
6-8
Router 2: N=2/4, Cisco SCE8000 #2 3/3/0
Router 1: S=0/3, Cisco SCE8000 #3 3/0/0
Router 2: S=0/3, Cisco SCE8000 #3 3/2/0
Router 1: N=3/1, Cisco SCE8000 #3 3/1/0
Router 2: N=3/1, Cisco SCE8000 #3 3/3/0
Router 1: S=1/3, Cisco SCE8000 #4 3/0/0
Router 2: S=1/3, Cisco SCE8000 #4 3/2/0
Router 1: N=3/2, Cisco SCE8000 #4 3/1/0
Router 2: N=3/2, Cisco SCE8000 #4 3/3/0
Router 1: S=1/5, Cisco SCE8000 #5 3/0/0
Router 2: S=1/5, Cisco SCE8000 #5 3/2/0
Router 1: N=3/4, Cisco SCE8000 #5 3/1/0
Router 2: N=3/4, Cisco SCE8000 #5 3/3/0
Chassis mount—The optical bypass module may be installed in the panel in slot #4 of the Cisco
SCE8000 chassis. This panel hosts up to two optical bypass modules.
External mounting panel: —The optical bypass module may be installed in a panel that is mounted
in a 19" rack. This panel can host up to four optical bypass modules.
Chapter 6
The Cisco SCE8000 Optical Bypass, page
Cabling the Line Ports and Completing the Installation
2-8.
OL-16478-03

Advertisement

Table of Contents
loading

Table of Contents