Cisco SCE8000 Installation And Configuration Manual page 71

Chapter 5 Connecting the Management Interfaces
•
•
•
•
•
•
The following table lists commands both for displaying the currently configured values and for
configuring these parameters. It also lists the command mode for each configuration command. All show
commands are executed from the User Exec command mode.
.
Figure 5-2 Initial Setup Configuration
Parameter
Management IP address
and subnet mask
Default gateway
Hostname
Authorization level
passwords
Clock
Time zone
OL-16478-03
Passwords for user, admin and root level access. These are authorization-level passwords, not
individual passwords. These passwords may be encrypted.
Passwords must meet the following criteria:
Minimum length — 4 characters
–
Maximum length — 100 characters
–
Begin with an alpha character
–
May contain only printable characters
–
The default password for all levels is cisco.
System clock— Current date and time. The clock and the calendar must always be synchronized.
Time zone—The name or ID of the time zone along with the number of hours offset from UTC.
Domain name server—Default domain name, which is used to complete unqualified host names, as
well as up to three domain name servers, which are used for DNS lookup.
You must also enable DNS lookup.
RDR formatter destination—The SCE platform generates Raw Data Records and sends them to the
specified destinations (external collection systems) via the RDR formatter. You can configure up to
eight RDR formatter destinations. Specify the IP address and port number for each destination.
show command
show interface GigabitEthernet
1/1 ip address
show ip default-gateway
show hostname
N/A
show clock
show calendar
show timezone
configuration command
ip address x.x.x.x subnet-mask
ip default-gateway x.x.x.x
hostname host-name
enable password level level
[encryption-type] password
calendar set hh:mm:ss day month
year
clock read-calendar
OR
clock set hh:mm:ss day month year
clock update-calendar
clock timezone zone-name
offset-hours
Cisco SCE8000 Installation and Configuration Guide, Rel 3.1.7
Initial Setup Parameters
configuration command
mode
GigabitEthernet
Interface Configuration
Global Configuration
Global Configuration
Global Configuration
Privileged EXEC
Global Configuration
5-3