Organization - Cisco SCE8000 Installation And Configuration Manual

Organization

The major sections of this guide are as follows:
Chapter Title
1
2
3
4
5
6
7
8
9
A
Cisco SCE8000 Installation and Configuration Guide, Rel 3.1.7
x
Cisco Service Control Overview, page 1-1
Introduction to the Cisco SCE8000 Platform,
page 2-1
Cisco SCE8000 Topology and
Topology-Related Parameters, page 3-1
Installing the Cisco SCE8000 Chassis,
page 4-1
Connecting the Management Interfaces,
page 5-1
Cabling the Line Ports and Completing the
Installation, page 6-1
Basic Cisco SCE8000 Platform Operations,
page 7-1
Troubleshooting, page 8-1
Removal and Replacement Procedures,
page 9-1
Using Optical Splitters with 10GBE Links,
page A-1
Description
This chapter provides a brief introduction to
Cisco Service Control.
This chapter provides a hardware overview of
the SCE8000 platform.
This chapter describes the possible
deployment topologies of the SCE8000 and
explains how various aspects of the topology
determine the configuration of the system.
This chapter explains how to install a
SCE8000 platform in the rack and properly
ground it.
This chapter explains how to connect the
SCE8000 platform to a local console and
perform the initial system configuration via
the setup wizard that runs automatically.
This chapter provides instructions for cabling
the Gigabit Ethernet ports for both one and
two SCE8000 topologies, and for configuring
Gigabit Ethernet (GBE) interface parameters.
In a topology utilizing two SCE8000s
(cascade), this includes the cascade ports as
well as the line ports.
This chapter describes how to start up the
SCE8000 platform, reboot, and shutdown. It
also describes how to manage configurations.
This chapter provides basic system startup
troubleshooting information.
This chapter explains the procedures for
removing and replacing the power supplies,
fan trays, and other modules.
This appendix supplies important information
regarding supported and not supported optical
splitter configurations in the 10GBE
environment.
About this Guide
OL-16478-03