1: Panel And System Troubles Holding Registers; 2: General Counters - Honeywell CGW-MB Installation And User Manual

Analog Values Input Registers
7.22.1 Panel and System Troubles Holding Registers
One hundred 16-bit registers are Reserved for panel troubles and one register is assigned
as an overall panel trouble indicator as shown in
Holding Register
Start Address
460000
460001
A single bit is Reserved for each trouble in the system. The assignment of bits to trouble
codes is shown in
7.22.2 General Counters
The General Counters are Registers used for having a count of different events in a Loop
based on detectors or modules.
Counters
Loop alarms Lx
Loop Troubles Lx
Loop Prealarms Lx
Loop Disables Lx
Loop tests Lx
Active NONAS Lx
CGW-MB Installation and Users' Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022
Addresses".
Table 7.31: Panel and System Troubles Holding Register Addresses
End Address
460000
460100
Table 7.41: "System Troubles Register Map"
Table 7.32: Example Counters for Detectors and Modules of Loops
Loop Detectors Loop Modules
414101
414102
414103
414104
414105
Table 7.31, "Panel and System Troubles
Panel Trouble Summary
(Total number of Trouble bits set for the node)
Panel Troubles
Loop 1
414106
414107
414108
414109
414110
414111
Modbus Communications
Description
.
Loop 2
Loop Detectors Loop Modules
414112 414117
414113 414118
414114 414119
414115 414120
414116 414121
414122
66