Honeywell CGW-MB Installation And User Manual page 150

ESSER Panels
Tools 8000 Settings for IQ8 Panels

1. Double click on Serial Interface in Tools 8000.
2. Select RS-232 from the Type of interface list.
3. Select Remote Access from the Device in use list.
4. Click OK.
5. Power Connection
Using a power cable, the CLSS Gateway mainboard can connect to the 12V power
supply module of the IQ8 panel.
NOTE: Use the details given on the power supply module of the panel.
NOTE: Although the CLSS Gateway mainboard is capable of receiving 24V DC power, it
can work with the 12V DC power of the IQ8 panel. Ensure that the power supply to the
CLSS Gateway mainboard is within +12V DC power.
On the CLSS Gateway mainboard Side
• Ensure that the RS-232 cable is connected in the RS-232 port of the CLSS Gateway
mainboard.
• Switch the S7 Switch next to the RS-232 port towards NUP_IN.
CGW-MB Installation and Users' Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022
Figure C.10: The S7 Switch
Connecting to the Panels
149