Verifying The Clss Gateway Mainboard Connections - Honeywell CGW-MB Installation And User Manual

Verifying the CLSS Gateway mainboard Connections

5.2 Verifying the CLSS Gateway mainboard Connections
While configuring the CLSS Gateway mainboard, confirm that the LEDs indicate
successful connections as shown in
If the LED is indicating differently, refer to
necessary, refer to the
Honeywell Technical Support.
LED Indicator
Power-Indicating LED
DL1
DL2
DL6
DL3
CGW-MB Installation and Users' Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022
Figure
6.2, "Troubleshooting"
State
ON
ON
OFF
OFF
a
Flashing fast
b
Flashing slow
OFF
ON
Flashing fast
Flashing slow
5.3.
Table 2.2 to know the operational status. If
section to fix the problem or contact
Successful power connection
ON - The cellular module is installed and
receiving power.
OFF - The cellular module is not installed.
There are no issues
Successful mobile connection
Ready for connection
Disabled mobile connection
The CLSS Gateway mainboard is in the configuration
mode
The CLSS Gateway mainboard is getting the
inventory data
The CLSS Gateway mainboard is communicating
with the panel
Configurations
Meaning
27