Cgw-Mb Parts; System Requirements; System Architecture; 1: Ip Restrictions For The Clss Gateway Mainboard - Honeywell CGW-MB Installation And User Manual

CGW-MB Parts

Other
Products
8.4 CGW-MB Parts
HON-CGW-MBB
CGW-MB
CGW-BB
50160636-001
32351718-001

8.5 System Requirements

The CGW-MB can monitor up to 16 panels. All of these panels should have a combined
maximum of 15,000 objects only. This includes all detectors, monitor modules, control
modules, bell circuits, and so on.
Refer to the panel manual for details about wiring limitations.
Access the configuration web page from a computer in the same IP subnet as the CGW-
MB with latest version of Google Chrome™. JAVA® version 6 or higher must also be
installed and enabled.

8.6 System Architecture

These are connections options for the CGW-MB architecture.
An Internet or Intranet IP network connection is used with both architectures.
8.6.1 IP Restrictions for the CLSS Gateway mainboard
• Assign a static IP address.
NOTE: DHCP is supported, but not recommended.
Before using DHCP with LAN for Intranet connection, consult the network
administrator of the Site.
• Following are not supported:
• Web access through an HTTP proxy server
• Use of a NAT (Network Address Translation)
CGW-MB Installation and Users' Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022
Table 8.1: CLSS-Compatible Equipment List
Type
Unmonitored but network compatible.
• NCA-2
• NCD
• NWS-3
• BACNET-GW-3
• NFN-GW-PC-HNW-2
• NFN-GW-EM-3
• PC NFN CLSS Gateway mainboards:
• NFN-GW-PC-F
• NFN-GW-PC-W
• NFN-GW-PC-HNMF
• NFN-GW-PC-HNSF
• NFN-GW-PC-HNW
• VESDA-HLI-GW
Part Number
CGW-MB with enclosure
CGW-MB board
CGW-MB enclosure
CGW-MB kit. It includes a 30" NUP cable
and a NOTIFIER lock and key set.
10 ft NUP Serial (RS-232) cable kit
Equipment
Description
The BACnet Feature
110