Table of Contents
Advertisement
2G Lift Dialer
3.5.
CONFIGUratION eXampleS
Phone number for SOS calls: 3351234567
Phone number for Autotest calls: 3409876543
Autotest call every 3 days, at random hour
Current date and time: 3 June 2014, time 16:04
Phone number for Technical & Battery alarm calls: 3523456789
Enable battery fault alarm: 500010
COMMAND DESCRIPTION
1
Configuration password
2
Load factory configuration
3
Phone number for SOS call
4
Phone number for Autotest calls
5
Periodicity for Test call
6
Current date and hour
7
Phone number for Technical & Battery alarm
8
Enable battery fault alarm
Note:
(A)
2G Lift Dialer synchronizes the date and hour with the hour of the GSM network at every power on,
if supported by the GSM operator, and after any received SMS.
3.6.
mUltI-COmmaNDS VIa SINGle SmS
21010*99#2001*04*3351234567#2111*03*3409876543#3503*9999#2212*03*3523456789#500010#
3.7.
reCOrDING the alarm meSSaGe (COmmaND 40#)
During the alarm call, the alarm message is played back several times by 2G Lift Dialer to the Alarm Center and/or Support
service before enabling the speakerphone conversation with the Car.
The recording is performed through the configuration local phone or by calling 2G Lift Dialer.
Insert the configuration password, then digit the command 40# and wait for the sound signal of
CONFIGURATION. After that you can start recording the message. The vocal message can be maximum 20 seconds long.
To stop the recording before the 20 seconds, press * keys
We suggest to record in the message the address of the system and the keys to press to active the speakerphone mode
in the Car and to reset the alarm.
Example "Lift Alarm at Digicom company in Cardano al Campo, via Alessandro Volta 39. Press 3 for speakerphone, at
the end 1 9 to reset the alarm".
3.8.
playING the alarm meSSaGe (COmmaND 41#)
The alarm message is played back several times by 2G Lift Dialer to the Alarm Center and/or Support service before
enabling the speakerphone conversation with the Car.
To play the recorded alarm message you must use the configuration local phone or call 2G Lift Dialer.
Insert the configuration password, then digit the command 41# .
At the end of message playback you will hear the sound signal
(see line 3)
(see line 4)
(see line 5)
(see line 6)
(see line 7)
(see line 8)
COMMAND BY PHONE
21010
*99#
2001*04*3351234567#
2111*03*3409876543#
3503*9999#
34030614*1604#
2212*03*3523456789#
500010#
CORRECT CONFIGURATION.
Configuration
COMMAND VIA SMS
-
21010*99#
210102001*04*3351234567#
210102111*03*3409876543#
210103503*9999#
- (A)
210102212*03*3523456789#
21010500010#
CORRECT
3.7
Advertisement
Table of Contents
