Remote Control Via Sms; List Of Authorized Users; List Of Authorized Users: Configuration - Digicom 2G GSM Gateway Lift User Manual

2G GSM Gateway Lift

3. REMOTE CONTROL VIA SMS

The device configuration is performed via SMS; so you can remotely manage the device. It will be possible at any time to remote
query the device to know the battery status and the quality of GSM signal.
Only authorized users can remote manage 2G GSM Gateway Lift; for every message received it will check the calling number
identification.
You can remote manage and set the following items:
• Phonebook with 4 users authorized to configure the device.
• Phonebook with 4 users authorized to receive the informative messages from 2G GSM Gateway Lift.
• Battery Low message when the back-up battery has about 90 - 60 minutes autonomy.
• Reception of "shutdown in progress" message when the back-up battery has about 30 - 5 minutes autonomy.
• Remote reboot to force a new registration to the GSM network.
• Status request to check the back-up battery status and the GSM signal quality.

3.1. LIST OF AUTHORIZED USERS

The first SMS of programming will be the list of users authorized to remote configure the device and the list of users that can
receive messages from the device.

3.1.1. LIST OF AUTHORIZED USERS: CONFIGURATION

*1 # ID # conf1 , conf2 , conf3 , conf4 # dest1 , dest2 , dest3 , dest4
ITEM
*1
#
ID
#
conf1
,
conf2
,
conf3
,
conf4
#
dest1
,
dest2
,
dest3
,
dest4
Note:
• You can configure a lower number of users.
• It is possible not to insert the list of users authorized to configurate the device; in this case you must
respect the sequence of # (hash) separation symbols.
• The phone numbers can be inserted with or without international prefix. You can use numbers from 0 to
9 and the symbol + as first symbol in case you insert an international prefix. Each phone number can be
composed of 17 digits maximum included the symbol +.
• If no list of authorized users is set (confix), then anyone can remote manage the device.
Examples:
*1#DIGICOM#+393351234567,+393409876543#+393351234567,+393409876543
*1#DIGICOM##+393351234567,+393409876543
DESCRIPTION
Key of message to configure the list of authorized users
Separation symbol
Device ID. Max: 8 alphanumeric characters Default: DIGICOM
Separation symbol
Phone number enabled to configure and manage 2G GSM Gateway Lift
Separation symbol
Phone number enabled to configure and manage 2G GSM Gateway Lift
Separation symbol
Phone number enabled to configure and manage 2G GSM Gateway Lift
Separation symbol
Phone number enabled to configure and manage 2G GSM Gateway Lift
Separation symbol
Phone number enabled to receive the informative message from 2G GSM Gateway Lift
Separation symbol
Phone number enabled to receive the informative message from 2G GSM Gateway Lift
Separation symbol
Phone number enabled to receive the informative message from 2G GSM Gateway Lift
Separation symbol
Phone number enabled to receive the informative message from 2G GSM Gateway Lift
Remote Control via SMS
ENG3.1