2G Lift Dialer
DESCRIPTION
Recording of alarm message
The command can be performed by local and remote phone only.
After the confirmation tone, dictate the message.
To interrupt the recording press * .
Automatically the recording stops after 20 seconds.
Example of message: "Lift alarm at company Digicom in Cardano al Campo,
via Alessandro Volta 39.
Press 3 for speakerphone, at the end 19 to reset the alarm".
Playback of alarm message
System identification (used only in calls with digital protocols: Ademco
Contact ID and Digicom)
Example 3 0 0 0 0 2 #
Date and time setting
Example 3 4 1 0 0 5 1 4 * 0 8 2 8 #
2G Lift Dialer synchronizes the date and time with the hour of the GSM
network at any power on, if supported by the operator, and after any
received SMS.
Autotest call: frequency
Example 3 5 0 3 * 0 5 0 9 #
The first autotest call will be performed after the set time, example: if the call
is set every 3 days, the first call will be made after 3 days.
For an immediate test call, se the next command.
Autotest call: test call
After this command 2G Lift Dialer make a test call right away.
This command doesn't cancel the frequency set (previous command)
Autotest call: number of attempts in case of failed call.
The attempts are made every 20 seconds. See next command.
Example 3 6 0 4 #
Autotest call: delay for the recalls
Alarm Call: delay for the recall in case of disconnection of the line without
alarm reset (19)
In case of missed call, the next attempt is made after 20 seconds.
Example 3 9 0 0 1 #
Alarm call: pause between the playback of comfort messages in case of
recall.
Alarm call: maximum time of conversation.
A few seconds before the time expires, you hear 2 beeps.
To extend the time at your disposal for other [t] minutes, digit the same code
used to enable the speakerphone. The default code is 3.
Configuration
COMMAND
4 0 #
4 1 #
3 0 [zzzz] #
3 4 [ddmmyy] * [hhmm] #
dd: day of the month from 01 to 31
mm: month from 01 to 12
yy: year from 14 (2014)
hh: hour from 00 to 23
mm: minutes from 00 to 59
3 5 [rr] * [hhmm] #
rr:
01 = every day
02 = every 2 days
03 = every 3 days
hh: hour from 00 to 23 99=random
mm: minutes from 00 to 59; 99=random
If hhmm = 9999 the 2G Lift Dialer will
calculate a random time from 00:00
to 23:59
3 5 9 9 * 0 0 0 0 #
3 6 [nn] #
nn: from 01 to 10 (default 03)
3 7 [ss] #
ss: from 01 to 99 seconds (default 20)
3 9 0 [mm] #
mm: minutes from 00 to 59 (default 02)
3 9 1 [tt] #
tt:
from 01 to 99 seconds (default 20)
3 9 2 [t] #
t:
from 1 to 9 minutes (default 3)
0 conversation active till the end
alarm reset code.
3.3