Tests During The Installation - Digicom 2G Lift Dialer User Manual

2G Lift Dialer
2.3.

teStS during the inStallation

Locate a proper position for the various parts of the system and before the final mounting check the following:
• 2G Lift Dialer Emergency phone
• SIM correctly inserted;
• antenna connector screwed until its end point;
Apply the magnetic base of the antenna only on metal zone, without connection to earth
Please use eventually the metal support, find in the package, fixed it to the wall
• good GSM signal: yellow led on or blinking;
• correct connection and correspondence of the cables to the pins of terminal board;
• terminal board screws tightened all the way down;
• terminal board completely fitted on the 2G Lift Dialer.
• Voice Box speakerphone
• Once Voice Box has been placed behind the car operating panel, it won't be possible anymore to access the terminal
board for connections;
• connection to the terminal board of the 2 wires coming from 2G Lift Dialer;
• connection of the 2 wires for the lift alarm button: the button must a 2 contact buttons to separate the circuit for the
activation of the alarm call from the bell circuit;
• for model 8D5804, eventual jumper to identify Car1 – Car2 – Car3;
• for model 8D5780, jumper to identify Top – Pit;
• correct display of the light signals behind the car operating panel;
• correct correspondence of the microphone behind the hole on the car operating panel;
• correct correspondence of the speaker behind the holes on the car operating panel.
Once the installation is completed you can go on with the configuration of the Emergency phone in few minutes with
one of the following possibilities, as you prefer:
• Application for smartphone Android: Lift Manager;
• via SMS by mobile phone;
• with telephone or mobile phone calling the 2G Lift Dialer;
• with a common DTMF phone connected to pins 3-4 of 2G Lift Dialer.
2.8
Installation